«Firma Russkiy Dvor. Shpon»
Русская версия сайта
Русская версия сайта
Commercial director
Julia Vladimirovna
+7(964)588-54-73 Rusovo1@mail.ru
General director
Sergey Anatolievich
+7(964)588-26-37 Direktor@rusdvor.com

Veneer from the producer



Veneer sliced Oak

Oak veneer is used for covering very different surfaces, which provide the ready item with brilliant style and gloss. Oak veneer has special appearance and recognizable fabric. The color of the oak veneer depends on the age of the initial material, conditions of growing, used in the production part of the trunk and also features of the manufacturing (smoking, bleaching, waxing etc.).

Oak veneer is represented by rather vide color range – sand color with sand, grey or green tinctures, light brown color. The drawing of oak veneer includes wide clear fluent lines. In clear natural color oak veneer is seldom used, as for expression and attractiveness it is usually smoked. The interior, where the oak veneer is used (interior doors, panels, furniture), definitely deserves attention.

Although the color is rather difficult (some people think, that it is rather difficult and dark accent), oak finishing gives monumentality and real natural harmony to the premise. A special feature of oak veneer is its extreme durability.

The raw materials for production of natural sliced oak veneer arrive to our production areas from different regions of the North Caucasus.

The main sizes of the produced by LLC «Firma Russkiy Dvor. Shpon» sliced oak veneer are:

  • Length from 2200 to 3200, width from 120 to 170 mm.
  • Thickness – 0,62 mm. Always available at the warehouse 10 000 sq.m.
  • Thickness - 1,5 mm. Always available at the warehouse
  • Thickness 2 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 2,5 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 3 mm (customized) production period up to 3000 sq.m. 2-3 working days;

Sliced beech veneer

Color of the veneer of this wood type can be from pink-yellow to red-brown with not very clear yearly stripes.

Most part of big heart rays provide beautiful texture with shining spots on the radial section. On the longitudinal section they create dark thin strokes. Most interesting decorative features of beech can be used with such saw cut.

Due to homogeneous structure beech veneer looks calm, warm, even soft, although beech is a hard and firm wood, nearly equal to the oak.

Sliced beech veneer is easily stuck. Since the middle of 90s beech veneer was the most "modern" for furniture covering.

Raw materials for production of natural sliced beech veneer arrive from different regions on the North Caucasus and Krasnodar region.

The main sizes of the produced by LLC «Firma Russkiy Dvor. Shpon» sliced beech veneer are:

  • Length from 2200 to 3200, width from 120 to 170 mm.
  • Thickness – 0,62 mm. Always available at the warehouse 10 000 sq.m.
  • Thickness - 1,5 mm. Always available at the warehouse
  • Thickness 2 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 2,5 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 3 mm (customized) production period up to 3000 sq.m. 2-3 working days;


Sliced ash veneer

Ash is a hard-wooded broadleaved species, which is differed with high density, durability and firmness of the wood. That is why this type is a good material for production of high quality veneer.

The color of ash veneer depends on the age of the material. It varies from white-ashy and easily yellow (young wood) to deep brown colors (old wood of 200 – 300 years age). The most useful for production of ash veneer is considered core wood of the old trees.

Such veneer differs with unrepeatable drawing with waves and nice changeable parts, reminding the structure of the olive tree.

Raw materials for production of natural sliced ash veneer arrive from different regions on the North Caucasus and Krasnodar region.

The main sizes of the produced by LLC «Firma Russkiy Dvor. Shpon» sliced ash veneer are:

  • Length from 2200 to 3200, width from 120 to 170 mm.
  • Thickness – 0,62 mm. Always available at the warehouse 10 000 sq.m.
  • Thickness - 1,5 mm. Always available at the warehouse
  • Thickness 2 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 2,5 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 3 mm (customized) production period up to 3000 sq.m. 2-3 working days;

Sliced pine veneer

The lovers of light shining interior should pay attention to the pine veneer, which has successfully proved itself as a covering material for furniture, covering parts of the interior (wall panels), doors. Pine veneer is especially used in the premises with high moisture level (it doesn’t rot or subject to fungosity). Pine veneer can visually widen the premise; give freshness, attractiveness and individual style.

The color of pine veneer (depending on the conditions of growth and age) varies from light yellow with pink accents to dark sand-yellow with brown and red tones. The color of veneer depends on the part of wood, which is used – middle or sapwood. A feature of the pine veneer is age differences in the color (with time it becomes darker).

Raw materials for production of natural sliced pine veneer arrive from the Altay region, Lesosibirsk.

The main sizes of the produced by LLC «Firma Russkiy Dvor. Shpon» sliced pine veneer are:

  • Length from 2200 to 3200, width from 120 to 170 mm.
  • Thickness – 0,72 mm. Always available at the warehouse 10 000 sq.m.
  • Thickness - 1,5 mm. Always available at the warehouse
  • Thickness 2 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 2,5 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 3 mm (customized) production period up to 3000 sq.m. 2-3 working days;


Sliced larch veneer

The lovers of light shining interior should pay attention to the pine veneer, which has successfully proved itself as a covering material for furniture, covering parts of the interior (wall panels), doors. Pine veneer is especially used in the premises with high moisture level (it doesn’t rot or subject to fungosity). Pine veneer can visually widen the premise; give freshness, attractiveness and individual style.

The color of larch veneer (depending on the conditions of growth and age) varies from light yellow with pink accents to dark sand-yellow with brown and red tones. The color of veneer depends on the part of wood, which is used – middle or sapwood. A feature of the larch veneer is age differences in the color (with time it becomes darker).

Raw materials for production of natural sliced larch veneer arrive from the Altay region, Lesosibirsk.

The main sizes of the produced by LLC «Firma Russkiy Dvor. Shpon» sliced larch veneer are:

  • Length from 2200 to 3200, width from 120 to 170 mm.
  • Thickness – 0,72 mm. Always available at the warehouse 10 000 sq.m.
  • Thickness - 1,5 mm. Always available at the warehouse
  • Thickness 2 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 2,5 mm (customized) production period up to 3000 sq.m. 2-3 working days;
  • Thickness 3 mm (customized) production period up to 3000 sq.m. 2-3 working days;
Commercial director
Julia Vladimirovna
+7(964)588-54-73 Rusovo1@mail.ru
General director
Sergey Anatolievich
+7(964)588-26-37 Direktor@rusdvor.com
Sales and supply department
+7(964)588-54-73
Яндекс.Метрика Рейтинг@Mail.ru